Transferring Sounds To The TX-24 Transmitter

For Spitfire

Program your sounds into the Spitfire as outlined in the instruction manual. Make certain that you do not use the same number for more than one sound!

Character Limit Requirements

The transmitter can only display 21 characters per line:

  • First 3 characters: Sound number (000-023)
  • 1 space character
  • Remaining 17 characters: Sound name (additional characters won't display)

Before You Begin

You must have exactly 24 sounds labeled 000 through 023 programmed into the Spitfire before you can download a playlist.

You will also need a 3.5mm male-to-male stereo patch cable for this process.

Transfer Instructions

  1. 1 Disconnect all accessories from the Spitfire (i.e. speakers or decoy)
  2. 2 Turn the power off on both the Spitfire and the TX-24
  3. 3 Connect patch cable from the sound upload jack on the TX-24 to the AUX jack on the Spitfire
  4. 4 Turn on the TX-24
  5. 5 After being powered on, the TX-24 display will say "Turn On Caller"
  6. 6 Power on the Spitfire
  7. 7 The display on the TX-24 will say "Transferring Data". When it's done, the display will say "Unplug Cable Press Send"
  8. 8 Disconnect the patch cable from the TX-24 and the Spitfire
  9. 9 Press and hold the send button for several seconds. The playlist has been transferred