Transferring Sounds To The TX915 Transmitter

For Inferno, Hammerjack, FX7, Banshee, Screaming Banshee

Follow these steps to transfer sounds from your game call to your TX915 transmitter.

Before You Begin

You will need a 3.5mm male-to-male stereo cable for this process.

Make sure that the cable detect setting is turned on (see section 5-19 in your manual).

Transfer Instructions

  1. 1 Disconnect all accessories from the game call (i.e. speakers or decoy) and make sure that it is turned off
  2. 2 Turn on the transmitter
  3. 3

    Connect the 3.5mm cable from the sound upload jack on the transmitter to the AUX jack on the game call

    Gray jack: The transmitter will display "Turn caller off. Connect remote to AUX jack on call."
    Black jack: No message will be displayed and you can continue to the next step
  4. 4 Power on the game call to initiate the transfer process
  5. 5 The display on the remote will update as the transfer progresses, showing the number of sounds transferred and whether a valid category file has been found
  6. 6 When complete, the screen will return to the normal view. Unplug the cable from the transmitter and game call
  7. 7 Browse through the categories or sound list to view the changes